Based on Land Rover Defender brake parts!

With our designed and manufactured disc brake kit to enable the fitting of Defender rotor discs and calipers! Made in the Netherlands!

Basic disc brake adapter kit to enable the mounting of Defender calipers and discs onto a Series Land Rover axle

The kit consists of:

• Left Swivel
• Right Swivel
• 2x wheel hubs
• 2x big filler plugs
• 2x small drain plugs
• 10x bolt for disc rotor
• 4x caliper bolt
• If you have chosen the wheel bearings option, we install the bearings for you. (not greased)
• If you have chosen the wheel stud option, we will fit the studs u find the wheel nuts in the boxes.

Suitable for all Series II, IIA and III axles. All original parts will fit onto and into the adapter parts. No need to modify anything.

Although you can use Range Rover / Discovery / Defender discs and calipers we advise to use disc part number: FTC902, caliper part numbers: STC1266 & STC1267 for the 109 or 88* (not included in this kit)

All the Additional Brake Components can order through our web store.

Please keep in mind, that you have to consider the complete brake system when fitting calipers and discs onto your Series Land Rover, I advise to copy the complete brake system, including master cylinder, brake line layout, valves and rear brakes when converting to disc brakes.

This kit is only an adapter to mount disc brakes on the front axle of your Land Rover, no other parts are included.

Disc brake adapter kit for the rear axle

• 2 hubs
• 2 caliper brackets
• 10x bolt for disc rotor
• 4x caliper bolt
• If you have chosen the wheel bearings option, you will find wheel bearings in the boxes.

Suitable for Rover and Salisbury axles. All original parts will fit onto and into these bare parts. No need to modify anything. 

Use disc part number: FTC3846, caliper part numbers: STC1268 & STC1269 (not included in this kit)

All the Additional Brake Components can order through our web store.